You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Side Lever Match Grade Breech for Benjamin Marauder for both Gen1 and Gen2 Mrods - MGBMrod

Be the first to review this product

Quick Overview

Highest quality Match Grade Side Lever Breech for Benjamin Marauder for both Gen1 and Gen2 Mrods.
To use with Benjamin Marauder magazine.

What's included:

1 - Super Match Grade Breech assembly.
2 - Air transfer port (polyamide tube, you must cut it for length needed)
3 - Longer Lever Axis screw to install on Gen1 Mrod.
4 -Special hammer upper screw to install on Gen1 Mrod.
5 -Barrel bushing with air transfer port installed to use barrel blanks without air transfer ports. But if you will install regular Mrod barrel, just put it away from the breech.**

See full Description


Availability: In stock

Only 2 left

* Required Fields



Technical Characteristics

Highest quality Dovetail Breech in .177 or .22;
Side lever gives you ability to use very high power hammer springs but with very comfortable cocking;
This breech is designed to use Benjamin Marauder magazines;
An innovative way to lock the cocking lever. In the open position side Lever is held by a spring with the ball being in the back of the breech. In the closed position the lever is held by wedge + neodymium magnet which can be seen in the pictures.

Made from Materials

Breech material - Aircraft grade aluminum;
Breech covering - Black Anodizing;
Pellet pusher material - Brass;
**Barrel bushing - Brass;

Tools Required

  • Screwdrivers;
  • Hex keys;
  • Silicone grease for O-rings;

Important to know

Marauder long screws for tube mounting not included!
** Barrel Bushing with air transfer port already installed to use barrel blanks without air transfer port. You need to make pellet entrance (just make a little cone in barrel)
But if you will use regular Marauder barrel just put this Bushing away from the breech.
Also barrel hole in breech is 10.98mm but Standard Crosman barrels are 11mm and the diameter varies. So you must machine your barrel approx. 72mm length to 10.96mm diameter. It's done so to make sure barrel always tightly sits in breech.

Note: Please carefully read "Important to know" section before purchase.

Additional Information

Free Shipping Yes

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

shopping online at deals polo.com